MTU C13 - Page 45

LUBE OIL SYSTEM
Number of cylinders 12V 12V 16V 16V
Lube oil operating temperature before en-
gine, from
R °C 92 92 92 92
Lube oil operating temperature before en-
gine, to
R °C 95
96
95
96
95 95
Lube oil temperature before engine, alarm R °C 97
98
97
98
97 97
Lube oil temperature before engine, shut-
down
L °C 99
100
99
100
99 99
Lube oil operating pressure before engine
(measurement block)
R bar 6.4
6.2
6.4
6.9
5.0 5.0
Lube oil operating pressure (low idle)
(meas. point: before engine)
R bar 2.6 2.6 2.0 2.0
FUEL SYSTEM
Number of cylinders 12V 12V 16V 16V
Fuel pressure at engine inlet connection,
min. (when engine is starting)
L bar -0.1 -0.1 -0.1 -0.1
Fuel pressure at engine inlet connection,
min. (when engine is running)
L bar -0.3 -0.3 -0.3 -0.3
Fuel pressure at engine inlet connection,
max. (when engine is starting)
L bar 1.5 1.5 1.5 1.5
GENERAL OPERATING DATA
Number of cylinders 12V 12V 16V 16V
Coolant preheating: preheating tempera-
ture (min.)
R °C 40 40 40 40
INCLINATIONS, STANDARD OIL SYSTEM (reference: waterline)
Number of cylinders 12V 12V 16V 16V
Longitudinal inclination, continuous max.
driving end down (option: max. operating
inclinations)
L degrees 15 15 15 15
Longitudinal inclination, temporary max.
driving end down (option: max. operating
inclinations)
L degrees N N N N
Longitudinal inclination, continuous max.
driving end up (option: max. operating in-
clinations)
L degrees 15 15 15 15
Transverse inclination, continuous max.
(option: max. operating inclinations)
L degrees 15 15 15 15
M015695/03E 2013-03 | Technical Data | 45
TIM-ID: 0000002983 - 002