MTU C13 - Page 61

Fault code No. Full designation Meaning Action
Related
parameter
No.
036 HI ETC2 Overspeed
Alarm configuration limit val-
ue 1; preliminary warning:
Speed of secondary turbo-
charger too high.
1. Reduce power.
2. Contact Service.
2.3013.93
1
037 SS ETC2 Overspeed
Alarm configuration limit val-
ue 2; main warning: Speed of
secondary turbocharger too
high. Fuel limitation to a
fixed value.
1. Reduce power.
2. Contact Service.
2.3013.91
2
038 AL ETC Synchro Fault
Synchronization error be-
tween exhaust turbocharger
1 and 2.
1. Reduce power.
2. Contact Service.
1.8004.20
5
039 AL ETC2 Cut-in Failure ETC2 failed to cut in.
1. Reduce power.
2. Contact Service.
1.8004.20
4
044
L1 Coolant Level Inter-
cooler
Charge air coolant level too
high/low (1st limit value not
attained).
Check coolant level
(→ Page 132).
2.0153.92
1
051 HI T-Lube Oil
Oil temperature too high
(1st limit value). Reduce power.
2.0125.93
1
052 SS T-Lube Oil
Lube oil temperature too
high (2nd limit value).
1. Reduce power.
2. Check engine oil
level (→ Page 110).
2.0125.93
2
057 LO P-Coolant
Coolant pressure too low
(1st limit value).
Check coolant cir-
cuit.
2.0101.92
1
058 SS P-Coolant
Coolant pressure too low
(2nd limit value).
Automatic engine
shutdown.Check
coolant level
(→ Page 122).
2.0101.92
2
063 HI P-Crankcase
Preliminary warning: Crank-
case pressure too high.
1. Reduce power.
2. Replace filter el-
ement of oil separa-
tor (→ Page 85).
2.0106.93
1
064 SS P-Crankcase
Main warning: Crankcase
pressure too high; engine
shutdown.
1. Contact Service.
2. Replace filter el-
ement of oil separa-
tor (→ Page 85).
2.0106.93
2
065 LO P-Fuel
Fuel supply pressure too low
(1st limit value).
Check fuel lines for
leaks.
Clean fuel prefil-
ter.Flush fuel prefil-
ter.
Replace fuel prefil-
ter filter element.
Replace fuel filter
(→ Page 104).
2.0102.92
1
066 SS P-Fuel
Fuel supply pressure too low
(2nd limit value).
Check fuel lines for
leaks.
Clean fuel prefilter.
2.0102.92
2
M015695/03E 2013-03 | Troubleshooting | 61
TIM-ID: 0000033662 - 001