Cranking engine manually (tool
mounted underneath)
1. Remove grounding device or guard plate.
2. Engage cranking tool (2) in ring gear (1)
and mount on flywheel housing.
• For 12/16V engines, use cranking
tool F6555766 with adapter F6558528.
• For 20V engines, use cranking
tool F6783293.
3. Fit ratchet (3) onto cranking tool (2).
4. Rotate crankshaft in normal direction of en-
gine rotation; apart from the normal com-
pression resistance, there should be no re-
sistance.
5. Cranking tool is removed by same proce-
dure in reverse.
M015695/03E 2013-03 | Task Description | 79
TIM-ID: 0000002521 - 005
To Next Page
Loading...
