Chapter 6 – SMS Examples
Multi-Tech Systems, Inc. SMSFinder User Guide for System Administrators (Document S000451B) 54
Chapter 6 – SMS Examples
Check to See if the SIM Card Is Installed
Correctly and Activated
This example will verify that the SIM is installed correctly and that it is activated.
1. Power up the SMSFinder. Wait until the Status LED and the LS LED are blinking before continuing.
Make sure all setup procedures and connections have been made. See Chapter 2.
2. Open the Web browser, enter the IP address, and login to the SMSFinder. See Chapter 3.
3. Go to the Network Setup > Cellular Modem screen.
• Enter the phone number of your SIM card. Example: 6126361654.
• Click the Save button.
• Click Save & Restart under the Menu Bar. Select Save.
Note: You do not have to restart the SMSFinder.
4. Send a text message to yourself. Do this on the SMS Services > Send SMS screen.
• To – Enter Phone Numbers – Enter the SIM phone and click Add. The phone number displays
in the box to the right.
• SMS Text – Enter an SMS Text message. The format add;SF100 is a trigger message word that
tells the SMSFinder to add
the phone number and name to the address book. Notice the use of
the semicolon in this message.
• Click Send. The following message displays: Your request is being processed.
• Click OK.
To Next Page
Loading...
