Multitech SF100-G - Appendix A - Application Programming Interface (API); Introduction; 1.1 Purpose; 1.2 Scope

Appendix A – Application Programming Interface (API)
Multi-Tech Systems, Inc. SMSFinder User Guide for System Administrators (Document S000451B) 59
Appendix A – Application
Programming Interface (API)
1. Introduction
1.1 Purpose
Requirement: Customers require an Application Programming Interface (API) to integrate the SMSFinder's
Send and Receive SMS capability into their custom application.
This document defines the API interface provided for sending SMS via the SMSFinder and for receiving
SMS via the SMSFinder
1.2 Scope
APIs are defined to send and receive SMS using HTTP or TCP protocols. The packet formats and
handshakes are provided in Section 3.
2. Acronyms and Definitions
Acronyms Definitions
API Application Programming Interface
HTTP Hypertext Transfer Protocol
SMS Short Message Service
TCP Transport Control Protocol
3. Overview of Send SMS API
Send API Request
ID: Msg ID
Query API Request
ID: Msg ID Status: Status Code
HTTP / TCP
Applicant
SMSFinder
.
.
.
SMS is
sent
Mobile
network