Configuration/settings
User manual 55530_hdb_en_16 75 / 156
No actuator power sup-
ply
Fig. 8-16: No actuator power supply
No actuator power supply defines
whether or not in case of failure of the actuator supply a diagnostic to that
effect is reported.
Tab. 8-13: No actuator power supply
Selection Meaning
D = Default
Report D The module reports the diagnostic "Failure of
actuator supply" to the controller that is connect-
ed to the slot.
Do not report The module does not report any "Failure of ac-
tuator supply" diagnostics to the controller that
is connected to the slot.
To Next Page
Loading...
Need help?
General
