Murr Elektronik 55530 - 10 Maintenance and Cleaning

Maintenance and cleaning
User manual 55530_hdb_en_16 152 / 156
10 Maintenance and cleaning
NOTE
 Replace defective or damaged devices.
NOTE
In the event of maintenance work, you can replace the module with the same
type, provided you save the PROFINET topology to the PLC.
 Check whether the rotary switch settings of the old and new modules
are identical.
Device cleaning:
 Use only oil-free compressed air or spirit
 Only use lint-free materials (e.g. leather cloth)
 Do not use contact spray