Murr Elektronik 55530 User Manual

Configuration/settings
User manual 55530_hdb_en_16 126 / 156
8.12 Factory settings
Reset to factory set-
tings - retain I&M data
The Reset to factory settings - I&M data retained function resets the mod-
ule to its factory settings but retains the I&M data saved in memory.
Proceed as follows:
 Click Connect online in the TIA portal.
 After connection, mark the module in question.
 Open the MVK-MPNIO module in project navigation.
Double-click Online & Diagnostics.
 Below the Functions tab, click Reset to factory settings to open a win-
dow.
 Activate the Retain I&M data selection.
 Press the Reset button.
The module is reset to the factory setting.
Reset to the factory
settings - default val-
ues
Tab. 8-44: Reset to factory settings - default values
Reset to the factory
settings - I&M values
Tab. 8-45: Reset to factory settings - I&M values
Setting Value
IP address 0.0.0.0
Subnet mask 0.0.0.0
Router address 0.0.0.0
PROFINET device name Empty
I&M values Value
System ID code Empty
Place identifier Empty
Installed date Empty
Description Empty
Additional information Empty

Murr Elektronik 55530 Specifications

General

Brand	Murr Elektronik
Model	55530
Category	Control Unit
Language	English