Cube67 System Manual
25 V 2.5
CAUTION:
Sensors may only be supplied via the bus node in a Cube67 system. Feedback
by sensors or an external power supply (in order to increase maximum current) is not
permissible.
3.3.2 Recommended Power Supply Units MCSPower+
Primary-clocked power supply units of the MCSPower+ series are specially designed to supply systems in
automation engineering. We recommend therefore that you use them to supply Cube67.
Note for DeviceNet users :
To supply the DeviceNet bus, we recommend Class 2 power supply units.
Please contact our sales assistants for information about these power supply units
certified to ODVA.
Table 3-13 : Recommended power supply units MCS
Power+
(single-phase)
Input voltage
95 to 132 VAC
Input voltage
185 to 265 VAC
Table 3-14 : Recommended power supply units MCS
Power+
(three-phase)
Input voltage
3 x 340...460 V AC