Cube67 System Manual
30 V 2.5
3.5.1 Protection Against Electrostatic Discharge
The products described in this manual contain complex semiconductor elements that can be destroyed or
damaged by electrostatic discharges (ESD). Damage does not necessarily result in an immediately
recognizable failure or malfunction. Failure or malfunctioning can occur with delayed effect or
sporadically.
CAUTION:
Never pull or plug in connectors while the equipment is under power.
Always observe the generally known safety precautions for ESD sensitive devices when handling the
devices. Take the following precautions in particular:
CAUTION:
Personnel entrusted with the installation must be electrostatically discharged before
handling the equipment. This can be accomplished by either touching a grounded
part of the installation or by the personnel wearing a correctly grounded ESD wrist
strap.
CAUTION:
Unused connections must be fitted with a dummy plug.