VJ-2638/1638X/1938WX/1638WX OPERATION MANUAL Panel setup menu
5.2 Test Print Menu 277
5.2 Test Print Menu
Performs nozzle check of Print head and setup list.
Refer to the following for the operation procedure of test print.
3.5 Test print
Setup Item Description
Nozzle Check Perform the nozzle check printing.
It is used to check whether there are any clogged heads, or missing/blurred prints.
3.5.1 Nozzle check
Mode Print Mode print can be performed.
Used to confirm the following printing conditions.
• Print quality
•Effect
• Pre-heater temperature (VJ-2638/1638X)
• Platen heater temperature (VJ-2638/1638X)
• Dryer temperature (VJ-2638/1638X)
• Media feed compensation micro adjustment value
3.5.2 Mode print
Setup List Setup list printing is performed.
Used to check the setup item and the user type.
3.5.3 Setup print
Palette Palette printing is performed as a color demonstration.
Color Verify (VJ-2638/1638X
only)
Print the color patches, then measure the color using the optional spectrophotometer
(SPECTROVUE VM-10). Compare the currently printed color with the previously printed
color to check the color difference.
3.5.5 Color Verify (VJ-2638/1638X only)
HeadAdjust Print a test pattern, check any misalignment between print heads, and then perform
adjustment.
3.5.6 Head alignment
— • [Enter] key: "Printing" is displayed on Operation panel and test printing starts.
• [Cancel] key: shifts to the previous menu.
5 Panel setup menu
To Next Page
Loading...
Need help?
General