Need help?Do you have a question about the MV Heating MV Airo 2 and is the answer not in the manual?
General| Power | 2000W |
|---|---|
| Voltage | 220-240V |
| Frequency | 50Hz |
| Adjustable Thermostat | Yes |
| Heat settings | 2 |
| Features | Overheat protection |
| Safety Features | Overheat protection |
Visual breakdown of heater components for installation.
Guidelines for mounting the heater body and required clearances.
Proper placement and connection of air inlet and outlet pipes.
Details on how to install additional ducting for air distribution.
Correct installation of combustion air intake and exhaust systems.
Instructions for connecting fuel lines from the tank to the heater.
Steps for fitting the fuel standpipe into the vehicle's fuel tank.
Procedures for installing the alternative fuel standpipe.
Complete wiring schematic for the brushless version of the heater.
Information on connecting timer and rheostat controls to the wiring loom.
Details on wiring loom plugs and the external temperature sensor probe.
Identification of various connection ports on the controller case.
How to operate the heater using the rheostat control knob.
Functions and programming of the mini timer.
Steps for manual start-up, shut-down, and output adjustment.
Procedures for setting heating and start times on the timer.
Checking temperature and switching between operational modes.
Accessing fault information, remote operation, and fuel priming procedures.
Setting language, date, time, manual on/off, thermostatic, fan, and fuel priming functions.
Programming multiple heating times and days of the week.
Checking error codes and resetting the controller to factory settings.
Essential maintenance tasks for heater longevity and performance.
Interpreting fault codes indicated by long flashes on the rheostat control.
List of error codes specific to the LCD timer and their meanings.
To Next Page
