GEM-P816 Programming Instructions
Page 24
NAPCO Security Systems
R
CS USER REPORTING OPTIONS (ADDRESS 0800-0831)
USERS 1 8
USERS 9 16
ADDR U1 U2 U3 U4 U5 U6 U7 U8 ADDR U9 U10 U11 U12 U13 U14 U15 U16
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
Enable Opening Report, Telco 1
0800
0801
Enable Closing Report, Telco 1
0809
0810
Enable Opening Report, Telco 3
0818
0819
Enable Closing Report, Telco 3
0827
0828
Enable Users to Report Opening
and Closings
CS USER REPORTING OPTIONS: [Default = blank (•) from address 0800-0831]
1. Select the desired option entering the option number (1-8) for each digit.
2. At the keypad, enter corresponding option number in address location. NOTE: Dark shaded data value box shows option
not available.
3. Press U to save.
USERS 33 36
Enable Users to Report Opening
and Closings
ADDR U33 U34 U35 U36
1 2 3 4 5 6 7 8
Enable Opening Report, Telco 1
0804
Enable Closing Report, Telco 1
0813
Enable Opening Report, Telco 3
0822
Enable Closing Report, Telco 3
0831
User 33 = Auto Arming/Disarming
User 34 = Quickloader Remote Arming/Disarming
User 35 = Easy Arming
(Opening not applicable)
User 36 = Keyswitch Arming
NOTE: These opening events will report as the user number
shown. Also, Keyfobs 1-8 (see Easy Menu Program
Driven Mode) will report as Users 9-16, respectively.