National Instruments DAQ Series User Manual

Index
DAQCard-700 User Manual I-2 ni.com
PC Card, C-1
typical configuration (figure), 2-2
conventions used in the manual, vii
counter/timers
See also general-purpose counter and
timing connections
configuration, 2-5
MSM82C54 counter/timer, 3-16
customer education, E-1
D
DAQCard-1200
configuration. See configuration
installation, 2-1
unpacking, 1-5
DAQCard-700
block diagram, 4-2
compared with PC-LPM-16, B-1
features, 1-1
major components, 4-2
what you need to get started, 1-2
data acquisition counter and timing
connections, 3-15
data acquisition timing circuitry
block diagram, 4-5
data acquisition rates, 4-7
multichannel (scanned) data
acquisition, 4-7
single-channel data acquisition, 4-7
theory of operation, 4-6
DGND signal, 3-2, 3-3
DIFF input
configuration, 2-5
definition (table), 2-4
differential input mode, 3-6
differential connections
common-mode signal rejection
considerations, 3-12
definition, 3-9
floating signal sources, 3-11
grounded signal sources, 3-10
when to use, 3-9
digital I/O
circuitry, 4-8
configuration, 2-5
signal connections, 3-13
specifications, A-2
DIN<0..7> signal, 3-2
DOUT<0..7> signal, 3-3
E
event-counting applications, 3-17
EXTCONV* signal
data acquisition counter and timing
connections, 3-15
definition, 3-3
timing (figure), 3-15
EXTINT* signal, 3-3
F
floating measurement system, 3-5
floating signal sources
definition, 3-4
differential connections, 3-11
recommended input configurations
(table), 3-7
frequency measurement application
(figure), 3-18
G
GATE, CLK, and OUT signals for
general-purpose timing, 3-16
GATE0 signal, 3-3
GATE1 signal, 3-3
GATE2 signal, 3-3

National Instruments DAQ Series Specifications

General

Brand	National Instruments
Model	DAQ Series
Category	Recording Equipment
Language	English