National Instruments GPIB Series User Manual

Index
© National Instruments Corporation I-5 GPIB-ENET/100 for Windows Me/98/95
T
technical support resources, D-1
timeout value
configuring, B-4
troubleshooting
EDVR error conditions, B-2
hardware problems, B-1
troubleshooting wizard
verifying installation, 5-2
U
updating the firmware, 6-5
using
CFG RESET switch, 6-3
DHCP, 6-2
firmware update utility, 6-5
Internet, 1-3
V
verifying
hostname, 3-7
installation, 5-1
voltage rating, C-1
W
Web support from National Instruments, D-1
winipcfg
using to determine network settings, 3-7
WinSock
before using NI-488.2, B-4
configuring, B-3
worldwide technical support, D-2

National Instruments GPIB Series Specifications

General

Bus Interface	GPIB (IEEE 488)
Operating Systems Supported	Windows, Linux, macOS
Weight	Varies by model
Form Factor	PCI, PCIe, USB
Number of GPIB Ports	1
Software Support	NI-488.2 driver
Compatibility	IEEE 488.1, IEEE 488.2
Connector Type	24-pin IEEE 488 connector
Power Requirements	Varies by model (e.g., USB bus-powered or external power)
Dimensions	Varies by model
Data Transfer Rate	Up to 8 MB/s