Native Instruments Komplete Audio 6 User Manual

▪ USB Data Errors: counts USB connection errors. Poor quality, or long USB cables as well
as irradiation can be the source of connection errors on the USB bus.
▪ Reset: A click on this button resets the error count.
System Performance Test Section
The System Performance Test section in the Diagnostics page of the Control Panel.
The System Performance Test section provides monitoring of the current DPC (Deferred Proce-
dure Call) latency value of your Windows system. A Deferred Procedure Call is a Windows
mechanism which allows high-priority tasks (such as the basic system tasks) to delay lower-
priority tasks. This specific DPC latency is not to be confused with the overall latency, ex-
plained in chapter ↑8.1, Technical Specifications, but it can add to it. The section has two dis-
plays and two buttons:
▪ Current Latency: displays the current DPC latency value.
▪ Maximum Latency: displays the highest DPC latency value monitored since the last time
you either started or restarted monitoring.
▪ Reset button: Press this button to reset the Maximum Latency value to zero.
▪ Start/Stop: Press this button to start monitoring DPC latency. Once started, the button la-
bel changes to Stop.
Advanced Configuration
Advanced Configuration on Windows (Control Panel)
KOMPLETE AUDIO 6 - Manual - 29

Native Instruments Komplete Audio 6 Specifications

General

Brand	Native Instruments
Model	Komplete Audio 6
Category	Recording Equipment
Language	English