Nautel VX150 - When the Nautel Nomenclature is Known:; When the Reference Designation is Known:; Reference Designation Lists; Column Content

VX150 TO VX2 TROUBLESHOOTING MANUAL PARTS INFORMATION
PAGE 3.2.2 VERSION 2.0 2023-04-20
When the Nautel Nomenclature is Known:
 Refer to the appropriate family tree (Figure 3.2.1 on page 3.2.4, Figure 3.2.2 on page 3.2.5, or
Figure 3.2.3 on page 3.2.6) and identify the block(s) associated with the Nautel nomenclature.
Locate the part's reference designation in the identified reference designation list in this section,
noting they are sorted alphanumerically.
When the Reference Designation is Known:
 Refer to the appropriate family tree depicted in Figure 3.2.1 on page 3.2.4, Figure 3.2.2 on page
3.2.5, or Figure 3.2.3 on page 3.2.6 with the full reference designation.
 Follow the family tree branches to the block that represents the lowest level assembly assigned a
Nautel configuration control number, then locate the reference designation information for that
Nautel configuration control number.
 Locate the part's reference designation and associated Nautel Part # in the list provided at the end
of this section. In a PDF manual, use Ctrl-F (find) to quickly locate the reference designation.
Reference Designation Lists
Reference designation lists are provided for assemblies that are assigned an alpha-prefixed Nautel
nomenclature (e.g., NAPA40A) or a numbered Nautel part (e.g., 235-8050).
To obtain the full reference designation for a specific part the Nautel configuration control number must
be located in the appropriate family tree (Figure 3.2.1 on page 3.2.4, Figure 3.2.2 on page 3.2.5, or
Figure 3.2.3 on page 3.2.6) to include the reference designation of all higher level assemblies. The
reference designation lists are presented in alphanumeric order - for each component level of the
transmitter - are divided into columns to aid in locating specific information.
Column Content
The following paragraphs provide an explanation of the purpose and contents of each column in the
part number indexes.
Component Level, Stock Code Column
This column contains the Component Level number (01 through 10, as required) and the Nautel Stock
Code (part number) assigned to each part.