18
BEfORE YOU START
Moving the Machine
The machine may be moved by one or more persons depending on
their physical abilities and capacities. Make sure that you and
others are all physically fit and able to move the machine safely.
1. Remove the power cord.
2. Use the Transport Handle to carefully lift the machine onto the
transport rollers.
3. Push the machine into position.
4. Carefully lower the machine into position.
NOTICE: Be careful when you move the elliptical. All abrupt motions can
affect the computer operation.
Leveling the Machine
The machine needs to be leveled if your workout area is uneven or if the Rail Assembly is slightly off
the floor. To adjust:
1. Place the machine in your workout area.
2. Safely stand on the back of the Rail Assembly for
approximately20seconds.
3. Step off the machine.
4. Loosen the locking wing nuts and adjust the levelers
until they all contact the floor.
Do not adjust the levelers to such a height that
they detach or unscrew from the machine. Injury to
you or damage to the machine can occur.
5. Adjust until the machine is level. Tighten the locking wing
nuts.
Make sure the machine is level and stable before you
exercise.
To Next Page
Loading...
Need help?
General
