Nautilus E514c User Manual

30
Pausing or Stopping
The Console will go into Pause Mode if the user stops pedaling and pushes STOP during a workout, or there is no RPM
signalfor5seconds(usernotpedaling).TheConsoledisplayshowsWORKOUTPAUSED,andafter4secondsthecurrent
workout data starts to scroll automatically (the same format as Results Mode). You can use the Increase/Decrease buttons to
move through the results manually.
1. Stop pedaling and push the STOP button to pause your workout.
2. To continue your workout, push START/ENTER or start pedaling.
To stop the workout, push the STOP button. The Console will go into Results / Cool Down mode.
User Statistics
Each User Profile stores the statistics from all workout data recorded for that user in three capacities - Last Workout, Aver-
ages, and Totals.
WhentheTOTALSdisplayedforastatisticexceedsthemaximumvalue,thecountwillstartagainatzero.
• Total number of workouts—maximumis9999.
• Total hours—maximumis999:59(999hours,59minutes).
• Average speed—mph or km (per units in setup)
• Total distance—maximumis9999.9.
• Total calories—maximumis999999.
The Statistics option in the User profile menu lets you look at the recorded data or delete it.
1. Push the My Nautilus
™
button at the Power-Up Mode screen. The Console display shows the User Profiles.
2. Use the Increase() and Decrease() buttons to select a User profile, and push START/ENTER to make your selection.
3. AfteryouselecttheUserprofileoption,youhavetwooptions:VIEWSTATSandWORKOUT.UsetheIncrease() and
Decrease() buttons to go to the Statistics option, and push START/ENTER to make your selection.
4. TheConsoledisplayshowstheUserStatisticsmenuoptions—LASTWORKOUT,AVERAGES,TOTALSandRESET
STATS. Use the Increase/Decrease buttons to move between the menu options, and push START/ENTER to make your
selection.
5. Use the Increase/Decrease buttons to move between the values, or after a few seconds the workout statistics start to
scrollautomatically.YoucanusetheIncrease/Decreasebuttonstomovethroughtheresultsmanually.PushSTOPtoexit
to the User Statistics menu.
The RESET STATS option will clear the accumulated workout values. Use the Increase/Decrease buttons to change your
selectionbetweenYESandNO,andpushSTART/ENTER.PushSTOPtoexittheRESETSTATSoption.
6. PushSTOPtogobacktotheUserprofilemenu—ViewStatsorWorkoutoption.

Nautilus E514c Specifications

General

Brand	Nautilus
Model	E514c
Category	Elliptical Trainer
Language	English