Nautilus E514c User Manual

5
SpECIfICATIONS
Before Assembly
Select the area where you are going to set up and operate your machine. For safe operation, the location must be on a hard,
levelsurface.Allowaworkoutareaofaminimum74”x130”(190cmx330cm).
Basic Assembly Tips
Follow these basic points when you assemble your machine:
• Readandunderstandthe“ImportantSafetyInstructions”beforeassembly.
• Collect all the pieces necessary for each assembly step.
• Using the recommended wrenches, turn the bolts and nuts to the right (clockwise) to tighten, and the left (counterclock-
wise) to loosen, unless instructed otherwise.
• When attaching 2 pieces, lightly lift and look through the bolt holes to help insert the bolt through the holes.
• Theassemblyrequires2people.
• Someaxlescontainoil.Usecautiontoavoidstainingclothesorcarpet.
Maximum User Weight: 300 lbs. (136 kg)
Power Requirements:
 OperationalVoltage: OperationalVoltage9VDC
Operating Current: 1500 mA
Regulatory Approvals:
AC Power Adapter: UL listed, CSA certified (or
equivalent),Rated120V
60HzInput,9VDC,1500mA
Output. Class 2 or LPS.
71”
(180.3 cm)
26” (66 cm)
62” (157.5 cm)
This product, its packaging, and components contain chemicals known to the State of California to cause cancer, birth
defects,orreproductiveharm.ThisNoticeisprovidedinaccordancewithCalifornia’sProposition65.Ifyouwouldlike
additional information, please refer to our website at www.nautilus.com/prop65.

Nautilus E514c Specifications

General

Brand	Nautilus
Model	E514c
Category	Elliptical Trainer
Language	English