Nautilus E514c User Manual

27
Edit User Profile
1. From the Power-Up Mode screen, push the My Nautilus
™
button and hold for 3 seconds to go to User Setup Mode.
 ToexittheUser Selection option, push STOP and the console will go back to the Power-Up Mode screen.
2. The Console will show a prompt to edit the user (EDIT <Name>) or delete the user (DELETE <Name>). Use the Increase/
Decrease buttons to move through the Edit menu options, and push START/ENTER to make your selection.
 ToexittheEditUseroption,pushSTOPandtheconsolewillgobacktotheUser Selection option.
3. After you start the Edit function, the Console will show the Edit Name prompt. To edit the name, push START/ENTER.
Note: Use the Increase/Decrease buttons to move through the alphabet and blank space (found between A and Z). To set
each letter, push the START/ENTER button. Push the STOP button to go back to the previous letter.
 PushandholdSTART/ENTERtocompletetheentryandgotothenextdataprompt.OryoucantaptheSTART/ENTER
buttontoaddspacesuntilthenextdatascreenappears.
4. To edit the other User data (EDIT AGE, EDIT WEIGHT, EDIT GENDER), use the Increase/Decrease buttons to select an
option and push START/ENTER. Use the Increase/Decrease buttons to adjust, and push START/ENTER to set each entry.
5. The Console display shows the CUSTOM prompt. To edit your Custom Workout, push START/ENTER.
6. The Program Display will show the left column (workout interval) is active by flashing. Use the Increase/Decrease buttons to
adjusttheresistanceleveloftheactiveinterval.PushSTART/ENTERtorecordtheresistancelevel.Thenextcolumntothe
right becomes active.
Note:TheConsoledisplayshowsthemessage“Nof20”duringsetup(Nisthecurrentinterval).Themaximumnumberof
intervals is 20.
Push and hold START/ENTER to accept the Custom Workout.
7. When done, push STOP and the Console will go back to the User Selection option.
Delete a User Profile
1. From the Power-Up Mode screen, push the My Nautilus
™
button and hold for 3 seconds to go to User Setup Mode.
 ToexittheMy Nautilus
™
option, push STOP and the Console will go back to the Power-Up Mode screen.
2. The Console will show a prompt to edit the user (EDIT <Name>) or delete the user (DELETE <Name>). Use the Increase/
Decrease buttons to go to the Delete option, and push START/ENTER to make your selection.
 ToexittheDeleteoption,pushSTOPandtheconsolewillgobacktotheEditandDeleteoptions.
3. After you start the Delete function, the Console will show a prompt to delete the User profile, or not delete the user and go
back to the Edit and Delete options. Push START/ENTER to make your selection.
4. After you delete the user, the Console will go to the Power-Up Mode screen.
Custom Workout
After your Custom Workout is set up in your User Profile, you can start the program from the CUSTOM workout option in the
Program Menu. The Console display will prompt you to set the Time for the workout (default is 30:00). Use the Increase/De-
crease buttons to adjust the Time value, and push START/ENTER to begin the workout.

Nautilus E514c Specifications

General

Brand	Nautilus
Model	E514c
Category	Elliptical Trainer
Language	English