2-3
Click the <Next> button.
Read the contents of the readme file and click “Next”.
If you would like to print this out, please click “Print”.
9
Click the <Next> button.
Select the installation default folder and click "Next."
The “Program Files” folder is the default installation folder.
10
If you want to install it in another path, type the path directly or click
the <find> button and select the desired folder.
Note
Click <Next> button.
If the same screen as the one
shown on the right appears, select
the item that you want to install
after confirming the following
reference and click “Next.”
11
Administrator Password : If you set an administrator password,
the Network Administrator Console will require this password to
make changes within the console. You should remember the
"Administrator Password" for future configuration changes. If you
do not remember the password, you can't execute the program or
alter management settings.
( If you want to cancel the previous password, refer to “26. How
to manage when a user forgets the password of the NCT-2000-
XP program” in Part 8.)
Note
To Next Page
Loading...
Need help?
General