To Next PageTo Next Page
Need help?Do you have a question about the NDC BenchMike Pro 2025 and is the answer not in the manual?
General| Brand | NDC |
|---|---|
| Model | BenchMike Pro 2025 |
| Category | Measuring Instruments |
| Language | English |
Information on accessing the NDC Customer Support portal for product support and knowledge base.
Contact numbers for NDC Systems by region (Americas, Asia Pacific, China, EMEA).
Contact numbers for Beta LaserMike Gauges by region (Americas, Asia Pacific, China, EMEA).
Contact numbers for NDC Metals Systems by region (Americas, Asia Pacific, China, EMEA).
Using the equipment in a non-specified manner may impair its protection.
Details laser type, safety considerations, and compliance with ANSI standards.
Illustrates and labels key components on the front and rear panels of the BenchMike Pro unit.
Details the measurement ranges and optional equipment for BenchMike Pro models.
Describes available work holding fixtures like universal slides and V-blocks.
Explains factory calibration procedures and recommends annual recalibration.
Details how to turn the unit on/off and navigate the touch screen interface.
Explains the laser sweeping process and how product diameter is measured.
Identifies potential sources of measurement error like dust, placement, and temperature.
Explains how data is displayed, processed, and how averaging affects accuracy.
Provides specifications for the laser beam and warnings for service personnel.
Covers power, lifting, location, ventilation, and maintenance procedures.
Introduces drawings used for installing the BenchMike Pro.
Provides dimensional drawings for the BenchMike Pro Model 2025.
Illustrates and labels the connectors on the rear panel of the Model 2025.
Provides dimensional drawings for the BenchMike Pro Model 2050.
Illustrates and labels the connectors on the rear panel of the Model 2050.
Details connecting the unit to a PC, digital I/O, and other interfaces.
Shows how to connect digital inputs to the BenchMike Pro.
Illustrates connecting digital outputs using the BenchMike Pro's +12V supply.
Details the pinout for the serial connector (#1) on the BenchMike Pro.
Details the DB-25 fixture connector and its pinout for stepper motors.
Guides on connecting a quadrature encoder to the BenchMike Pro.
Lists requirements for printing to a network-attached printer.
Outlines the steps to configure the BenchMike Pro for network printing.
Lists requirements for printing to a USB printer.
Outlines the steps to configure the BenchMike Pro for USB printing.
Explains how the BenchMike Pro alerts operators to system errors.
Details non-intelligent fixture position display and intelligent fixture identification.
Describes the General Purpose Fixed V-Block Fixture and its specifications.
Details the features and available lengths of the Universal Slide Fixture.
Describes the DRO Slide Fixture for positioning parts and measuring distances.
Covers powering on, using data buttons, and understanding the touch screen layout.
Explains mode icons and accessing frequently-used functions via the Mode menu.
Details how to display and move between feature menus and graphs.
Guides on accessing measurement setup parameters like type, method, and averaging.
Covers system functions like date/time, I/O ports, and button setup.
Explains communication port setup for serial, USB, and Ethernet.
Describes using libraries to store and recall setup information.
Covers settings for reports and output ports.
Explains the key differences between Sample and Batch reports.
Details the Sample Report for single measurements of multiple parts.
Describes the Batch Report summarizing statistical results for measured parts.
Explains how to format serial output data, including headers and terminators.
Explains thermal and barometric compensation for temperature and pressure differences.
Describes how to define measurement units, resolution, and rounding.
Explains saving and storing settings for features for repeated applications.
Defines expressions, fixture settings, measurement types, and nominal/limit values.
Allows computing values based on collected data using mathematical expressions.
Allows displaying up to 32 data items and automatic scrolling for tolerance checks.
Guides on defining custom measurement types beyond the standard seventeen.
Explains connecting and using a footswitch to trigger functions without touching the unit.
Defines PURL as a command language for communicating with host computers.
Explains the structure of PURL commands with and without wrappers.
Maps status update characters to commands for requesting latched/non-latched status.
Allows setting temporary command prefixes to speed up command entry.
Lists commands by category and hierarchy for common usage.
Lists commands by category and hierarchy for common usage.
Lists operational parameters like dimensions, power requirements, and operating temperature.
Lists general performance specifications for BenchMike Pro models.
Lists specific performance specifications for the BenchMike Pro Model 2025.
Lists specific performance specifications for the BenchMike Pro Model 2050.
Provides drawings indicating the measurement area of the BenchMike Pro models.
Lists options for the laser beam spot size.
