BenchMike Pro Instruction Handbook: Installation 2-23
2.5 Adding a USB Printer
2.5.1 Requirements
The following are required to allow the unit to print to a USB printer:
• A USB printer must be plugged into the USB A-type connector on the rear of the unit
• The operator must have a PC with a web browser attached to the same network as the unit.
2.5.2 Procedure
1. Ensure an appropriate PC Network configuration, e.g., 10.32.0.60
2. Verify the IP configuration of the printer, e.g., 10.32.2.15
To Next Page
