BenchMike Pro Instruction Handbook: Setup 4-13
On the DNS tab, the Primary DNS Address and Secondary DNS
Address can be changed.
The Assignment tab offers options to enable/disable Program-
mable Universal Resource Language (PURL) commands. These
commands are used to for remote control and programming of
the BenchMike Pro. The Ethernet port to be used for connec-
tions is 8001. PURL commands on the serial port are not affect-
ed.
The last option from the System menu, Erase All, clears all user
libraries and system settings, restoring the gauge to the factory
default settings. You will be asked to confirm this selection twice
because the change is irreversible.
4.6.2 Sleep and Shutdown Functions
From the Setup menu, you can turn the BenchMike Pro to sleep
or shutdown mode.
Selecting Sleep shuts off the BenchMike Pro’s display LCD.
Touch the screen anywhere to end sleep mode.
If you select Shutdown, you will be asked to confirm that you
wish to shut down the BenchMike Pro. If yes, the BenchMike Pro
will power down by itself. To restart the unit, press the power button on the back of the BenchMike Pro.
To Next Page
