4-48 BenchMike Pro Instruction Handbook: Setup
4.15.6 Scan Errors Configuration
This page allows you to determine whether scanner errors
are latched or not. When enabled, all scan error conditions
will persist until cleared by the user.
Selecting Ignore Scan Errors disables scan error detection.
This can result in erroneous measurements. Use this feature
with caution.
4.15.7 International Configuration
From this page you can select UK English, US English,
French, German, or Spanish for all spelling, date, and num-
ber formats. Other international language support is availa-
ble. Contact NDC Technologies for details.
4.15.8 Options 1: Reports
This page allows you to enable or disable report options.
Note that Fixture Reports will only provide data during meas-
urement when a fixture is connected or configured for use.
To Next Page
