Trunk Outgoing Call
7
One-Touch Dialing
One-Touch Dialing allows you to store ten of your most frequently called outside numbers as personal
abbreviated dial numbers at your extension so you can call them with just a single touch. Dial number to be
stored is up to 18 digits including pauses (TRFR key), flashes (FLASH key) and stops (CONF key). The One
Touch Dial numbers are stored under the ten One-Touch keys (No.1 to No.10) in F01 to F10.
In addition, when the number of system Abbreviated Dialing is set to 100, the remaining 100 numbers
memory can be used for personal abbreviated dial numbers at 10 Key telephones. The assigned Key
Telephone user can store up to 10 more dial numbers under ten One-Touch Keys in F11 to F20.
1. Seize a Trunk line.
2. Press key which stores desired phone number.
1. Press key.
2. Press key.
3. Press key and .
4. Press a key to store a phone number.
5. Dial phone number to be stored. (One-Touch Key No.1 to
No.10 store numbers in F01-F10.)
6. Repeat steps 3 to 5.
7. Press key to exit from One-Touch Dialing entry.
- Do not lift handset.
1. Press key.
2. Press key.
3. Press key which stores phone number.
1. Seize a Trunk line.
2. Press key.
3. Press key which stores the desired phone number.
1. Press key.
2. Press key.
3. Press key and .
4. Press key.
5. Press a key to store a phone number. (One-Touch
Key No.1 to No.10 store numbers in F11-F20.)
6. Dial phone number to be stored.
7. Go to Step 3 to enter another number
or
Press to finish.
- Do not lift handset.
1. Press key.
2. Press key.
3. Press key.
4. Press key which stores phone number.
To place an outside call:
To store a One-Touch Dial
number:
To place an outside call:
To store a One-Touch Dial
number:
SPK
DC
One-Touch
One-Touch
∗
SPK
OPAC
One-Touch
SPK
OPAC
DC
One-Touch
SPK
ICM
∗
ICM
(Assigned KTS only)
(Assigned KTS only)
To check the stored One-
Touch Dial number:
One-Touch
CHECK
DC
To check the stored One-
Touch Dial number:
One-Touch
CHECK
DC
(Assigned KTS only)
OPAC
To Next Page
Loading...
Need help?
General
