Other Features
70
Room Status
When the DSS Console is in Room Status Mode, Room Status can be Changed at No.10 extension or at all
extensions according to your needs.
1. Lift handset or press .
2. Press key.
3. Press .
4. Dial the extension No. to change room status. (e.g. 18)
5. Dial status No.(0 - 5).
6. Hang up.
1. Lift handset.
2. Press .
3. Dial the extension No. to change room status.(e.g. 18)
4. Dial status No.(0 - 5).
5. Hang up.
Note 1: Status Numbers are as follows:
No. Indication Meaning
0 Check In Guest is in the room.
1 Maid Required Guest left the room and cleaning is required for Maid.
2 Maid In Room Guest left the room and Maid is cleaning the room.
3 Check Out The room is vacant, and ready for Check In.
4 Reserve The room is reserved.
5 Unavailable The room is out of order.
Note 2: “Check In” Operation is invalid if the Room Status is “Unavailable”. Change the status to
“Check Out” before “Check In” operation.
SPK
ICM
∗
#
∗
0 6 7
To Change room status in
Room status mode:
To Next Page
Loading...
