Charts
74
System Number Plan
Due to the flexibility built into the system, your dialing codes may differ from those in this manual.
Check with your supplier and make a note in the Revised Codes column of any differences.
STANDARD CODES REVISED CODES
Extensions
10 – 73
Operator Access (KTS)
0
Outside Lines
01 – 24
Doorphone Numbers
88 – 89
Queuing Groups
1 – 6
Hunt Groups
0 – 4
Internal Page Zones
80-84
External Page Zone
85-87
Abbreviated Dial No.
00 - 99 or 000-199
System Flash Rates for LEDs (KTS)
When LED Status
Your phone is idle (not on a call) All LEDs out (dark)
Outside Calls
An outside line is busy The line key is ON (Red)
An outside call is ringing your phone The line key flashes Slowly (Red)
Indicator lamp flashes Slowly (Red)
And then you answer it The line key is ON (Green)
You place the outside call on Hold The line key flashes Quickly (Green)
Or a co-worker places the call on Hold The line key flashes Moderately (Red)
You place the outside call on Exclusive Hold The line key flickers Moderately (Green)
You place the outside call on Hold The line key flashes Quickly (Green)
Intercom Calls
An Intercom call rings your phone ICM flashes Quickly (Red)
Indicator lamp flashes Quickly (Red)
You answer the Intercom call ICM is ON (Red)
You place the Intercom call on Hold ICM flickers Slowly (Red)
And then it recalls to you ICM flickers Slowly (Red)
Miscellaneous Features
You activate Microphone Mute MIC is ON (Red)
You activate Do Not Disturb DND/CONF is ON (Red) or flashes Moderately
(Red) (depending on programming)
You send a Message Waiting Indicator lamp flickers Moderately (Red)
You have a Message Waiting Indicator lamp flashes Quickly (Red)
You activate Call Forwarding TRFR flashes Slowly (Red)
Your phone is Monitored MIC flashes Quickly (Red)
You are Monitoring a phone MIC flickers Moderately (Red)
To Next Page
Loading...
