Other Features
69
Hotel/Motel Feature
SLT Hold Cancel
The system provides the mode that Single Line Telephone can not use flashing operation. This feature is
useful for prohibiting guest phones’ putting call on hold. Check with your supplier for details.
DSS Mode Switching
The Extension paired with a DSS console allows the DSS console to indicate extension status in three modes.
Business, Room Status, and Wakeup modes are available.
1. Lift handset or press .
2. Press key.
3. Press key.
4. Press .
1. Lift handset or press .
2. Press key.
3. Press key.
4. Press .
1. Lift handset or press .
2. Press key.
3. Press key.
4. Press .
Note) These function can be assigned to Line Key, One-Touch key, or DLS key. (Function No.24:Business,
No.25:Room Status, No.26:Wakeup) When assigned, the corresponding key will light to indicate the mode.
The mode switching operation is effective only in on-hook status. The default mode is Business.
The LED indication and status in each mode are as follows:
LED Business Room Status Wakeup
Light Busy Check In Wakeup call set
Extinguish Idle Check Out -------------------------------
0.1 sec ON/0.1 sec OFF DND set Maid Required No answer to Wakeup call
0.5 sec ON/0.5 sec OFF MW set Maid in room -------------------------------
0.4 sec ON/0.1 sec OFF Ringing Reserved -------------------------------
0.1 sec ON/0.1 sec OFF/0.1 sec ON/0.7 sec OFF -------------- Unavailable -------------------------------
7 3
7 4
7 5
To switch to Business
mode:
To switch to Room Status
mode:
To switch to Wakeup mode:
SPK
SPK
SPK
OPAC
OPAC
OPAC
ICM
ICM
ICM
To Next Page
Loading...
Need help?
General
