Trunk Outgoing Call
11
Key Touch Tone
The Key Touch Tone feature allows a tone to be emitted from the built-in speaker each time a Line, One-
Touch or dial pad key is pressed. The tone confirms the key was fully pressed.
- Do not lift handset.
1. Dial .
- Do not lift handset.
1. Dial . Final Key Touch Tone is heard.
Easy Trunk Access
Easy Trunk Access lets you access an outgoing line without pressing a Line key or dialing a two-digit line
number. A single-digit code automatically accesses an outgoing outside line.
1. (On-Hook and Speaker off condition)
2. Dial .
- A line is seized and dial tone comes over the speaker.
1. Lift handset.
2. Dial 9 or 0.
Queuing Group Access
Queuing Group Access lets you access the first available outgoing line in a Queuing Group without pressing
a Line key or dialing a two-digit line number. A single-digit code automatically accesses an outgoing outside
line from small number, large number, or rotated number.
1. Press key.
2. Press key.
3. Dial Queuing Group number (1-6).
- A line is seized and dial tone comes over the speaker.
1. Lift handset.
2. Dial 06 or 96 .
3 Dial Queuing Group number (1-6).
To activate Key Touch Tone:
To cancel Key Touch Tone:
To access the first available
outgoing line:
To access the first available
line in a queuing group:
∗
∗
0
SPK
ICM
To Next Page
Loading...
Need help?
General
