NEC 1232 AK Series - Storing Caller-ID Information to the Caller-ID Table While on a Call; Changing, Deleting, or Adding New Entries to the Caller-ID Table

Other Features
56
Storing Caller-ID Information to the Caller-ID Table While on a Call
-On-hook condition
1. Press key.
2. Dial .
-If you hear a confirmation tone (one short beep), the
information is successful stored in an empty bin in Caller-
ID Table.
-If an error tone (three short beeps) is heard, the Caller-
ID Table may be full. (You will see TABLE IS FULL on
the display.)
Changing, Deleting, or Adding New Entries to the Caller-ID Table
-On-hook condition
1. Press key.
2. Dial .
3. Dial bin number (001-100).
(example: 001)
4. Press .
5. Dial number (if necessary).
6. Press .
7. Enter name (if necessary).
(example: INFRONTIA CORP)
8. Press .
9. Press key.
Repeat from step 3 to edit information in another bin.
10. Press key.
To store the Caller-ID information
shown on your display:
8137101
15 : 20 27/08/98
To change an entry in Caller-ID Table:
BIN NO.
THU 27 15:20PM
10
BIN NO. 001
8137101
(If number is received)
(If number is already stored)
BIN NO. 001
BIN NO. 001
INFRONTIA CORP
OPAC
9 0
OPAC
9 1
∗
∗
∗
HOLD
CLEAR