NEC 1232 AK Series - Broadcasting the Message at Later Time

Alphanumeric Display TEL Features
42
1. Press and .
2. Dial message number (00-49) to refer.
3. Dial .
4. Edit message by Message Edit Mode.
5. Press .
6. Dial message number to store.
7. Dial .
8. Dial message number for next storing.
or
Press to finish.
Broadcasting the Message at Later Time
Text message can be set to indicate on display telephones in hunt group at programmed time. If it is set, and
time comes, the message will appear on display in 1 minute with alarm tone.
1. Press and .
2. Dial message number (00-49), dial .
or
Press key No.1 or No.2 for personal message, then
dial .
3. Edit message if required.
4. Press .
5. Dial an extension number or hunt group number (00-07).
6. Press key to set more extension if required. (This
step is only available when extension number is dialed at
step 5.)
7. Dial .
8. Enter the time of indication with 4 digits
(e.g. PM3:00 => 1500)
9. Dial .
1. Press key.
2. Press key.
1. Press key.
To store system message:
To set send-later message:
To cancel send-later message:
To stop the alarm tones and
clear the display:
CHECK
CLEAR
CHECK
CLEAR
One-Touch
ICM
ICM
TRFR
∗
CHECK OPAC
∗
∗
∗
∗
∗
CHECK OPAC
(No.10 extension only)