To Next Page

To Previous Page

3.4

Hanging Mounting

Notice

Before attaching the LED Poster to the ceiling, carefully read 3.1.2 Information on Wall Mounting

and Hanging Mounting.

Prerequisites

Personal

Two or more people

Tools

Ladder/ elevated working platform

Tools for mounting (e.g. hammer, screwdriver,

Allen key, jaw spanner)

Drilling equipment (e.g. drilling machine and

fitting attachment/head)

depending on mounting surface,

wall material/condition

Mounting material (screws, dowels etc.)

depending on

 weight of LED Poster

 mounting surface, wall

material/condition

Measurement tools (e.g. rule, spirit level)

Equipment

2 Hanging brackets

6 screws M6 x 16 mm (with washer)

see 2.1 Contents, p. 7

How to do it

Attach suitable mounts for the LED Poster to the ceiling (e.g. a hook). Step 1)

Attach the Hanging brackets on each side of the LED Poster with three screws. Step 2)

The tightening torque range is 275 – 314 N·cm.

Attach the wires from the ceiling to the Hanging brackets on the LED Poster. Step 3)

Result: The LED Poster is mounted to the ceiling.

Other manuals for NEC A Series

Questions and Answers:

Need help?

Do you have a question about the NEC A Series and is the answer not in the manual?

General