NEC A Series User Manual

© NEC Corporation 2019 43
Menu
Description
Settings
Language
Set the system language
RF management
Manage the playback of all LED Posters
except the reference device when the RF
time synchronization mode is enabled.
Before operation, enter the password
"admin".
Custom server
Add, modify or delete custom servers.
DHCP service
Turn DHCP service on/off.
If the PC and LED Poster are connected
through Ethernet cable and there is no
other DHCP server in the network, turn on
DHCP server to connect to the LED Poster
automatically, if the connection is not
stable, please set a static IP address for
the PC.
Setting
 Set the storage path of files, incl. the
ViPlex Express configuration files, data,
temporary files, etc.
 Enable or disable the terminal auto
reconnection function and set the
reconnection interval.
Check for
Updates
Check for software updates.
Help
View ViPlex Express User Guide.
About
Show the version of ViPlex Express and
the official website of NovaStar.
Solutions
5.3.2
The function Solutions offers to create, edit, delete, import, export and publish solutions.
Figure 13: Start Screen Solutions

NEC A Series Specifications

General

Panel Type	IPS
Response Time	5ms
Brightness	250 cd/m²
Contrast Ratio	1000:1
Power Consumption	25W (typical)
Weight	5.5 kg
Color Support	16.7 million colors
Refresh Rate	60 Hz
Resolution	1920 x 1080 pixels
Connectivity	VGA, HDMI, DisplayPort
Viewing Angle	178° horizontal, 178° vertical
Stand Adjustments	Tilt, Swivel, Height