To Next Page

To Previous Page

Connecting via Wireless LAN 4.4.3

The LED Poster products have dual Wireless LAN function which can provide Wireless LAN hotspot

as well as serve as Wireless LAN Station at the same time.

4.4.3.1

Wireless LAN Access Point Mode

Users can access the LED Poster directly when it is connected via Wireless LAN Access Point (AP).

There is no need for configuration. Connect the Wireless LAN Access Point of the LED Poster. SSID

is "AP" + the last 8 digits of the SN, for example, "AP10000033".

Figure 8: Network Diagram – Connection via Wireless LAN Access Point Mode

4.4.3.2

Wireless LAN Station Mode

Users can access LED Poster through external router when it is connected via Wireless LAN

Station Mode.

Configuring via ViPlex Handy

Step 1)

Click the screen name to select Network Settings, Wireless LAN Setting. Step 2)

Turn on Wireless LAN Station Mode. Click the Wireless LAN name of the external router Step 3)

and enter the password of the Wireless LAN.

Configuring via ViPlex Express

Select Screen control, Network configuration. Step 2)

Turn on Wireless LAN Station Mode. Click the Wireless LAN name of the external router Step 3)

and enter the password of the Wireless LAN.

Other manuals for NEC A Series

Questions and Answers:

Need help?

Do you have a question about the NEC A Series and is the answer not in the manual?

General