Set the information of receiving cards used to load
the screen. Parameter meanings:
Ethernet Port Quantity: Number of Ethernet ports
used to load the screen
RV Card Size: Resolution of a single receiving card
RV Card Quantity: Number of receiving cards used
to load the screen
Offset coordinate: Image offset
Cabinet Connection: Connection order of receiving
cards
Set the rules for manual and timed screen on or off.
Manual: Switching on or off a screen manually.
Timed: Switching on or off a screen automatically
as required.
Manual: Adjust the brightness manually.
Smart: Set rules for automatic and scheduled
brightness adjustment.
In smart brightness adjustment mode, if Auto
Brightness Adjustment is selected, you need to
set Auto Brightness Adjustment Parameters,
that is, screen brightness will be adjusted according
to the auto brightness adjustment parameters
during the scheduled enabling time.
Select Timed Brightness Adjustment and set the
brightness to a fixed value. Screen brightness will be
set to the fixed value during the scheduled opening
time.
Auto Brightness Adjustment Parameters: Divide the
environment brightness range from the maximum
value to the minimum value into several equal
intervals and set the relevant screen brightness of
each interval. Select Auto Brightness Adjustment
and the screen brightness will be adjusted
automatically according to current ambient
brightness.
Send the receiving card configuration file with the
extension ".rcfgx" to the LED Poster (Taurus).
Save the configuration file to mobile device before
sending the file. ViPlex Handy can automatically
identify the configuration file and display it on RV
Card Configuration page.
To Next Page
Loading...
Need help?
General
