© NEC Corporation 2019 52
Give current information acquiring time to the
selected screen (memory status, CPU usage,
environment brightness).
View and export play logs.
Manage the fonts used by the LED Poster.
Set the IP address for an LED Poster based on
your actual needs while connecting the Poster to
the Internet via Ethernet cable.
View configuration parameters for connecting
screens to VNNOX and NovaCare.
Upgrade the application software and system
software of terminals.
Note: Keep the power on during upgrade.
Turn on or off screens remotely.
Set parameters related to RF synchronization.
Display the terminal MAC address, terminal IP
address, system software version, product
model, application software version.
5.3.4.2
Managing the Playback
Manage the play mode, volume and content of terminals.
Click the Screen control menu button. Step 1)
Select the Play management function. Step 2)
Result: The Play Management Screen appears.
Enabling Synchronous Playing
Select the target terminal in the terminal list. Step 1)
Select Enable next to Synchronous Playing. Step 2)
Result: A pop-up dialog opens.
Click the OK button to confirm. Step 3)
Adjusting Volume in Real Time
Drag the slider or enter a value to adjust volume. Step 1)
Note: Volume can be adjusted only when the LED Poster is in asynchronous mode.
When the information related to RF synchronization is displayed, it indicates that volume
synchronization is enabled on the current terminal. See relevant operations in 6.3.8. RF
synchronization requires you to specify a master device and slave devices. Users only need to set
the volume of the master device. The slave devices will keep the same volume as the master
device via RF signal