NEC A Series

© NEC Corporation 2019 54
Figure 18: Brightness Adjustment – Smart Adjustment
Perform the following operations based on your actual needs: Step 5)
Operation
Step
Create a rule
a) Click the + button.
Result: A pop-up dialog opens.
b) Choose the Timing button or Auto button.
c) Set the corresponding brightness adjustment rules.
d) Click the Add button.
Result: The rule is created.
Modify a rule
a) Select a rule.
b) Click the button.
Result: A pop-up dialog opens.
c) Modify the rule.
d) Click the Add button.
Result: The rule is modified.
Delete a rule
a) Select one or more rules.
b) Click the button.
Result: A pop-up dialog opens.
c) Click the Confirm button.
Result: The rule is deleted.
Clear a rule
a) Click the button.
Result: A pop-up dialog opens.
b) Click the Confirm button.
Result: The rule is cleared.
Enable a rule
a) In the rule list, turn on Enable switch next to a rule.
View current
brightness
a) Click the button.
Click the Apply button to confirm the configuration. Step 6)
Result: The configuration is saved.