NEC IntraMail 4 - 0101 Program Entry

0101 - Class of Service
0101 - Class of Service Options
IntraMail System Guide Chapter 3: Programming ◆ 191
3
0101 Program Entry
0101 - Class of Service Options (Page 1 of 2)
(Entry Range) [Default Setting]
ICM + #*#* + Password (372000) + HOLD + 0101 + HOLD.
COS NUM Enter the number of the COS you want to program (1-15) + HOLD
OFF PREM FWRD (9=Yes, 6=No) [No]
BREAK IN (9=Yes, 6=No) [COS 1=No, COS 2-15=Yes]
CAMP-ON BUSY EXT (9=Yes, 6=No) [Yes]
CALL FORWARDING (9=Yes, 6=No) [Yes]
SYS SPDL ACCESS (9=Yes, 6=No) [Yes]
EXTENDED RING (9=Yes, 6=No) [No]
PRIVACY (9=Yes, 6=No) [No]
LINE Q PRIORITY (9=Yes, 6=No) [No]
FORCE DISCONNECT (9=Yes, 6=No) [COS 1=Yes, COS 2-15=No]
CAMP-ON TO LINES (9=Yes, 6=No) [COS 1=Yes, COS 2-15=No]
PAGE ALL CALL (9=Yes, 6=No) [Yes]
PAGE ZONE 1 (9=Yes, 6=No) [Yes]
PAGE ZONE 2 (9=Yes, 6=No) [Yes]
PAGE ZONE 3 (9=Yes, 6=No) [Yes]
PAGE ZONE 4 (9=Yes, 6=No) [Yes]
PAGE ZONE 5 (9=Yes, 6=No) [Yes]
PAGE ZONE 6 (9=Yes, 6=No) [Yes]
PAGE ZONE 7 (9=Yes, 6=No) [Yes]
SILENT MONITOR (9=Yes, 6=No) [No]
FLASH FOR SLT (9=Yes, 6=No) [Yes]
ACD SUPERVISOR (9=Yes, 6=No) [No]
SINGLE RING (9=Yes, 6=No) [No]
VIEW SYS ALARMS (9=Yes, 6=No) [No]
AUTO HOLD (9=Yes, 6=No) [No]
ACTIVATE NITES (9=Yes, 6=No) [COS 1=Yes, COS 2-15=No]
DIRECT TRUNK ACCESS (9=Yes, 6=No) [COS 1=Yes, COS 2-15=No]
REMOTE FWRD (9=Yes, 6=No) [COS 1=Yes, COS 2-15=No]
SOFTKEYS (9=Yes, 6=No) [Yes]
RECORD CONV (9=Yes, 6=No) [No]
CLID DISPLAY (9=Yes, 6=No) [Yes]
2nd CALL CLID (9=Yes, 6=No) [Yes]
3rd PARTY CLID (9=Yes, 6=No) [No]
‘-’ IN CID DISP (9=Yes, 6=No) [Yes]