NEC IntraMail 4 - 8008 Program Entry

8000 - Voice Mail
8008 - IntraMail Dial Action Tables
252 ◆ Chapter 3: Programming IntraMail System Guide
8008 Program Entry
8008 - Dial Action Tables Program Entry
(Entry Range) [Default Setting for Dial Action Table 1]
ICM + #*#* + Password (372000) + HOLD + 8008 + HOLD.
DIAL ACTION TABLE - Enter the table number you want to program (1-16)
When entering data, 1 = TRF, 2 = UTRF, 3 = REC1, 4 = REC 2, 5 = LOGON, 6 = Hangup, 7 = GOTO, 0 = Undefined.
DIGIT “1” [UND - Undefined)
No entry
DIGIT “2” [UND - Undefined)
No entry
DIGIT “3” [UTRF]
[XXX]
DIGIT “4” [UTRF]
[XXX]
DIGIT “5” [UND - Undefined]
No entry
DIGIT “6” [UND - Undefined]
No entry
DIGIT “7” [UND - Undefined]
No entry
DIGIT “8” [UND - Undefined]
No entry
DIGIT “9” [HNGUP - Hangup]
No entry
DIGIT “0” [UTRF]
[300 (Operator)]
DIGIT “*” [REC1]
[IXXX]
DIGIT “#” [LOGON]
[IXXX]
TIMEOUT [UTRF]
[300 (Operator)]