NEC IntraMail 4 - 1003 Program Entry

1000 - Trunk Programming
1003 - Trunk Options
IntraMail System Guide Chapter 3: Programming ◆ 197
3
1003 Program Entry
1003 - Trunk Options Program Entry
(Entry Range) [Default Setting]
ICM + #*#* + Password (372000) + HOLD + 1003 + HOLD.
PICK-UP GROUP (1-8, 0 = Unassigned)[0]
DAY TERM (Extension, UCD master, Ring Group master, or Key Ring (Entered by pressing CLEAR)) [KEY RING]
DAY OVERFLOW (Yes/No) [No]
DAY OVRFLW DEST (Extension, UCD master, Ring Group master, or Key Ring (Entered by pressing CLEAR)) [300]
NIGHT TERM (Extension, UCD master, Ring Group master, or Key Ring (Entered by pressing CLEAR)) [KEY RING]
NIGHT OVERFLOW (Yes/No) [No]
NT OVRFLW DEST (Extension, UCD master, Ring Group master, or Key Ring (Entered by pressing CLEAR)) [300]
DAY RING TYPE (1=Type A, 2=Type B, 3=Type C) [Type A]
NIGHT RING TYPE (1=Type A, 2=Type B, 3=Type C) [Type A]
DELAY RING TYPE (1=Type A, 2=Type B, 3=Type C) [Type A]
MOH SOURCE (0=None, 1=External, 2=Tone 1, 3=Tone 2, 4=Message On Hold) [External]
TANDEM TRUNK (Yes/No) [No]
ANS TABLE (1-16) [1]
DIAL 9 GROUP (0-8) [0]
EXT’S OPERATOR (Extension number) [300]
Press this: To do this:
HOLD
Enter (accept) data you entered.
CONF
Cancel your entry and back up to the previous prompt level.
VOL ▲ or Vol ▼
Scroll to the next prompt.
CHECK
Restore the previous entry.