Centrex Transfer
60 ◆ Chapter 2: Features IntraMail System Guide
Step 4 Set the Flash timer for compatibility with the connected Centrex trunks.
4.1 0402 - PBX/Centrex Flash
- Set the flash interval for compatibility with the connected Centrex.
✔By default, this timer is 800 mS.
Step 5 Set the Pause timer for compatibility with the Centrex Transfer feature.
5.1 0401 - Dialing Pause
- Set the pause interval for compatibility with the Centrex Transfer feature.
- Normally, you can leave this timer at its default setting.
✔By default, this timer is 1 second.
Operation
Operation is automatic once set up in programming.
To Next Page
Loading...