NEC MH240 - BASIC OPERATION; TO POWER ON THE PHONE (STANDBY MODE)

13
3.BASIC OPERATION
o TO POWER ON THE PHONE
(STANDBY MODE)
- Press and hold the key for 2 seconds
or more. The start screen appears and the
Info LED flashes. After that your phone
displays the following initial screen.
Standby mode
This initial screen is called Standby
mode in this guide.
- Make sure the Antenna icon ( ) is
displayed on your phone as follows.
Antenna icon indicates you can use
the phone. If Antenna icon indicates
out of service area ( ), please
contact your network administrator.
o TO POWER OFF THE PHONE
- Press and hold the key for 2 seconds
or more. “Power Off” is displayed and the
Info LED flashes.
9/2 Tue 08:27AM
223 Mike
Current Date
A day of the week
Current Time
My Name
Phone Number
TIP
9/2 Tue 08:27AM
223 Mike
Antenna icon
TIP