NEC MH240 - Offhook Ring; Rtp Alarm

41
- The display returns to the previous screen.
You can reach the Auto Response of
Headset menu by pressing the
following keys.
To go to the Auto Response menu:
o OFFHOOK RING
Factory Default: Enable
Your can accept a second incoming call.
- Press the key while in Standby mode.
Your phone displays the main menu.
- Press the key to select “5.Setting” and
then press the key.
- Press the key to select “1.User Setting”
and then press the key.
- Press the key to select “1.Incoming
Call” and then press the key.
- Press the key to select “9.Offhook
Ring” and then press the key.
- Press the key to select “1.Disable” or
“2.Enable” and then press the “OK” soft
key.
This feature does not work
depending on your system.
You can reach the Offhook Ring
menu by pressing the following keys.
To go to the Offhook Ring menu:
o RTP ALARM
Factory Default: Disable
Your phone can provide an alarm if RTP packet
loss is suspected.
- Press the key while in Standby mode.
TIP
TIP
Offhook Ring
1.Disable
2.Enable
OK Back
TIP
AutoResponse
OK Back
3 times