NEC MH240 - Vibration Setting; Incoming Mode

39
- Press the key while in Standby mode.
Your phone displays the main menu.
- Press the key to select “5.Setting” and
then press the key.
- Press the key to select “1.User Setting”
and then press the key.
- Press the key to select “1.Incoming
Call” and then press the key.
- Press the key to select “5.Private Call”
and then press the key.
- Press the key to select “1.Allow
Incoming” or “2.Block Incoming” and then
press the “OK” soft key.
You can reach the Private Call menu
by pressing the following keys.
To go to the Private Call menu:
o VIBRATION SETTING
Factory Default: Pattern1 (All kind)
You can select a vibration setting pattern on a
call kind basis (External Ring, Internal Ring, IM
and Non-notification).
- Press the key while in Standby mode.
Your phone displays the main menu.
- Press the key to select “5.Setting” and
then press the key.
- Press the key to select “1.User Setting”
and then press the key.
- Press the key to select “1.Incoming
Call” and then press the key.
- Press the key to select “6.Vibrator” and
then press the key.
- Press the key to select a call kind you
want to change the vibration setting for and
then press the _ key.
- Press the key to select the vibration
setting you want and then press the “OK”
key.
By pressing the “ Conf” or “ Stop” soft
key, you can sample the Vibration
setting while you select a Vibration
setting.
You can reach the Vibration setting
menu by pressing the following keys.
To go to the Vibrator menu:
o INCOMING MODE
Factory Default: Both
You can select an incoming mode of Ring and
Vibration.
- Press the key while in Standby mode.
Private Call
1.Allow Incoming
2.Block Incoming
OK Back
TIP
Vibrator
1.External Ring
2.Internal Ring
3.IM
4.Non-notification
Vibrator
Conf OK Back
1.Disable
2.Pattern1
3.Pattern2
TIP
TIP