38
You can reach the Ring Tone menu
by pressing the following keys.
To go to the Ring Tone menu:
o INCOMING POPUP
Factory Default: Disable
Your phone can display a popup window while
ringing.
- Press the key while in Standby mode.
Your phone displays the main menu.
- Press the key to select “5.Setting” and
then press the key.
- Press the key to select “1.User Setting”
and then press the key.
- Press the key to select “1.Incoming
Call” and then press the key.
- Press the key to select “3.Incoming
Popup” and then press the key.
- Press the key to select “1.Disable” or
“2.Enable” and then press the “OK” soft
key.
When a caller is not registered in
your Directory, your phone does not
display a popup window even if this
feature is enabled.
You can reach the Incoming Popup
menu by pressing the following keys.
To go to the Incoming Popup menu:
o ILLUMINATION
Factory Default: Green (All kind)
You can select an illumination color of the Info
LED on a call kind basis (External Ring, Internal
Ring, IM and Non-notification).
- Press the key while in Standby mode.
Your phone displays the main menu.
- Press the key to select “5.Setting” and
then press the key.
- Press the key to select “1.User Setting”
and then press the key.
- Press the key to select “1.Incoming
Call” and then press the key.
- Press the key to select “4.Illumination”
and then press the key.
- Press the key to select a call kind you
want to change an illumination and then
press the key.
- Press the key to select an illumination
you want and then press the “OK” key.
By pressing the “ On” or “ Stop” soft
key, you can view the Illumination
while you select an Illumination.
You can reach the Illumination menu
by pressing the following keys.
To go to the Illumination menu:
o PRIVATE CALL
Factory Default: Allow Incoming
Your can block incoming calls without Caller
ID.
To Next Page
Loading...
