NEC MH240 - Headset

40
Your phone displays the main menu.
- Press the key to select “5.Setting” and
then press key.
- Press the key to select “1.User Setting”
and then press key.
- Press the key to select “1.Incoming
Call” and then press the key.
- Press the key to select “7.Incoming
Mode” and then press the key.
- Press the key to select “1.Both”,
“2.Ring Vib” or “3.Vib Ring” and
then press the “OK” soft key.
You can reach Incoming Mode menu
by pressing the following keys.
To go to the Incoming Mode menu:
o HEADSET
Factory Default: Headset (Ring Tone
Sending), None (Auto response)
Your can modify a headset mode.
- Press the key while in Standby mode.
Your phone displays the main menu.
- Press the key to select “5.Setting” and
then press the key.
- Press the key to select “1.User Setting”
and then press the key.
- Press the key to select “1.Incoming
Call” and then press the key.
- Press the key to select “8.Headset” and
then press the___ key. Your phone displays
as follows.
Ring Tone Sending:
- Press the key to select “1.Ring Tone
Sending” and then press the key.
- Press the key to select “1.Headset”or
“2.Speaker” and then press the “OK” soft
key.
- The display returns to the previous screen.
You can reach the Ring Tone
Sending of Headset menu by
pressing the following keys.
To go to the Ring Tone Sending
menu:
Auto Response:
- Press the key to select “2.Auto
Response” and then press the key.
- Press the key to select an auto response
times you want and then press the “OK”
soft key.
TIP
IncomingMode
1.Both
2.Ring Vib
OK Back
3.Vib Ring
TIP
Headset
1.Ring Tone Sending
2.Auto Response
Ring Sending
OK Back
1.Headset
2.Speaker