NEC MH240 - SPEED DIAL;PRESET DIAL; TO USE SPEED DIAL

33
7.SPEED DIAL/PRESET DIAL
You can use Speed Dial assigned multi function
keys (up to 8 entries) and Preset Dial assigned
dial keys (up to 10 entries).
o TO USE SPEED DIAL
- In Standby mode, press a function key
( to ) to select one Speed Dial
entry that has already registered in your
phone. For example, press the key to
make a call to “F3.Ken” that is listed as the
F3 entry.
o TO ENABLE SPEED DIAL
- Press the key while in Standby mode.
Your phone displays the main menu.
- Press the key to select “5.Setting” and
then press the key.
- Press the key to select “1.User Setting”
and then press the key.
- Press the key to select “6.Keypad
Mode” and then press the key.
- Press the key to select “2.Function
Key” and then press the key. Your
phone displays the Function Key menu.
- Press the key to select “2.Speed Dial”
and then press the “OK” soft key.
You can enable Function Keys as
Speed Dial by pressing the following
keys.
To Enable Speed Dial:
When you enable Function Keys as
Speed Dial, Function Keys will not
work as system function keys.
Assign Dial
OK Back
F1.John
F2.Eric
F3.Ken
F4.Kenny
Function Key
OK Back
1.System
2.Speed Dial
TIP
TIP