NEC MH240 - SPECIFICATIONS; TECHNICAL SPECIFICATIONS

71
15.SPECIFICATIONS
o TECHNICAL SPECIFICATIONS
The following shows the technical specifications of MH240.
Item
Specifications
Wireless Interface
IEEE802.11b/g
Codec
G.711u-Law, G.711A-Law, G.729A, G.729B, G.729AB
Payload Size: 20 to 80 ms
Control Protocol
NEC Enhanced SIP, SIP (RFC3261) *Note,
Authentication
IEEE802.1X (EAP-TLS, PEAP)
Encryption
WEP (64 bit / 128 bit), TKIP, AES
LCD
Monochrome LCD, 120 × 90 pixels
Main Feature
Call History, Directory, Speed Dial, Courtesy Mode
Ringer
Ring Tone : selectable from 16 kinds
Ring Volume : selectable from 5 levels
Battery
Lithium Ion Battery, 3.7 V - 850 mAh
Battery Life
Talk Time : up to 3 hours
Standby Time : up to 80 hours
AC Adapter
INPUT : AC 100 V to 240 V, 50/60 Hz, 0.25 A
OUTPUT : DC 5 V, 1 A
DC Plug : miniUSB (typeB) plug
Operation Temperature
0 to 40
o
C (Under charging : 0 to 35
o
C)
Operating Humidity
10 to 90 %
Dimension
135.0 × 48.0 × 17.8 mm
Weight
94.36 g
Certification and
Compliance
<USA / Industry Canada>
CSA60950-1
FCC Part 15 Class B
RSS-210
HAC
<Europe>
Directive 1999/5/EC
EN 60950-1
EN 300 328
EN 301 489-17
EN 50360
<Australia / New Zealand>
AS/NZS 60950.1
AS/NZS 4268
AS/ACIF S004
AS/NZS CISPR 22 2006
*Note In case of using a SIP server except SIP servers recommended by NEC, a
connection test is required.